A clean, non-toxic, easy to install, patented self-taping RADIANT BARRIERS that provides increased comfort, energy efficiency and savings, and lower heating and cooling costs.
Radiant Barriers do not have an R value since the R-value for reflectivity cannot be measured. However, radiant barriers can be tested as part of an assembly where the R-value can be observed and measured. In this case, the R-value can be achieved when the radiant insulation is installed as tested. R-values cannot be estimated based upon different installation methods.
Read This Before You Buy: The chart shows the R-value of this insulation. R means resistance to heat flow. The higher the R-value, the greater the insulating power. Compare insulation R-values before you buy. There are other factors to consider. The amount of insulation you need depends mainly on the climate you live in. Also, your fuel savings from insulation will depend on climate, the type and size of your house, the amount of insulation already in your house, and your fuel use patterns and family size. If you buy too much insulation, it will cost you more than what you'll save on fuel. To get the marked R-value, it is essential that this insulation be installed properly.
REFLECTS HEAT
MicroFoil effectively reflects a heat source as opposed to absorbing and dissipating it as fiberglass insulations must do. This reflectivity works both ways: radiating summer heat outward and retaining winter heat inside.
EASY TO USE (New Patented Self-Taping)
Because MicroFoil is made with plies of MICROFOAM (an extremely low-density, flexible polypropylene foam), it is much lighter weight and easier to handle than other reflective or fiberglass insulation products.
SMOOTH FINISHED SURFACES
PRACTICALLY ELIMINATES
Bird and insect infestation.
CONDENSATION CONTROL
When installed correctly, MicroFoil provides an excellent thermal and vapor barrier, greatly reducing condensation buildup.
SIMPLE, SAFE INSTALLATION
MicroFoil requires only a pair of scissors or utility knife and a staple gun. It does not require masks or long clothing for installation.
MicroFoil rolls are available with foil on both sides, or with foil on one side and fire retardant white polypropylene backed foil on the other side. Rolls come in 48" or 72" widths.
COMPARISON CHART
|
|
|
|
| R-Factor |
|
|
| Easy to install |
|
|
| Self-taping |
|
|
| Aluminum foil |
|
|
| Radiant barrier |
|
|
| Scrim reinforced |
|
|
| Puncture resistant |
|
|
| Clean |
|
|
| Non-toxic |
|
|
| Lightweight |
|
|
| Improved comfort |
|
|
R 14 downward with 2x6 wall cavity with 5/8" drywall one side and 5/8" OSB other side
R 7.4 as part of 2x4 wall cavity horizontal with 1/2" gypsum 1 side and 1/32" metal other side
R value is a measure of thermal performance, the higher the R value the greater the insulating value.
MicroFoil has a patented self-sealing tape on a foil flange running along one edge to make installation fast and easy. A utility knife and a staple gun are the only tools necessary. No need for protective clothing and masks. MicroFoil does not contain hazardous chemicals or harmful materials that cause itching or respiratory problems. MicroFoil is safe and easy to use.